All guides

Tools & Integrations

Put today’s sales on a desk dial

Turn a small round touchscreen into a dial that shows today’s takings — the same numbers as the Live View — on your desk or your counter, refreshing itself every minute.

  1. 1You need a Waveshare ESP32-S3-Touch-AMOLED-1.75 (a round 1.75" touch display, sold by Waveshare and on Amazon) and a USB-C cable that carries data. The dial needs the Vendor plan, like the Live View.
  2. 2Make an API key for it: Settings -> API Keys, name it something like Desk dial, and tick only Reports read. Copy the key — FairKeep shows it once.
  3. 3On a computer, open https://dial.varo.industries/sales/ in Chrome or Edge, plug the board in, click Connect, pick the USB JTAG/serial port and choose Erase device on the first install.
  4. 4If the board does not show up in the list, unplug it, hold the BOOT button, plug it back in and let go, then try again. After installing, unplug and replug it so it starts the dial.
  5. 5The dial shows Set up WiFi. On your phone, join the FairKeepDial-Setup WiFi network, pick your WiFi, paste the API key and save. The dial restarts and shows today’s sales within a minute.
  6. 6Tap the dial to switch between Total, POS only, Web only and All three. Press and hold to refresh straight away.
  7. 7Everything else — cents, brightness, how often it refreshes, locking it to one view — is on the dial’s own settings page at http://fairkeepdial.local/ (or the address it shows on the setup page). The firmware is free and open source at https://github.com/VAROIndustries/esp32-desk-dials.

Related guides